Commercial & Industrial. Open 7 days a week.
Get a thorough rooftop investigation
Flat Roof Services
Roof Repairs
Flat Roofing Maintenance
Silicone roofing
Our Services
• Hot & Cold Tar Applied
• New & Tear Offs
• Built Up Roofing
• Hot Asphalt Coating
• E.P.D.M. Rubber
• E.P.D.M. Roof Coatings
• Gutters & Aluminum Coping
• Rehabs and restorations
• Concrete install and repair
• Flashing Work
• Metal Roofing
• TPO Roofs
• Aluminum Coating
• Torch Applied Membranes
• Protective Coating
• General Contracting Services
• Exterior Painting & Maintenance
• Interior and exterior painting
Single-Ply Membranes
Single-Ply Membranes are sheets of rubber and other synthetics that can be ballasted, mechanically fastened, or chemically adhered to insulation creating a layer of protection on your commercial facility.
While Single-Ply Membrane Roofing is one of the most well-known types of commercial roofing material, there are several types to fit your budget and facility needs.
There are two main types of single-ply membrane commercial roofing: Thermoplastic Polyolefin (TPO) and Ethylene Propylene Diene Terpolymer (EPDM).
They differ in their chemical makeup, how they are installed, and their energy efficiencies.
The RubberGard EPDM system has delivered more than three decades of commercial roofing success by building upon a heritage of innovation in rubber polymer technology. The versatile membrane offers a variety of installation options including fully adhered, ballasted or mechanically attached that deliver superior long-term weatherability and exhibit exceptional wind uplift resistance.
Torch down Roofing Systems
APP Modified Bitumen RoofingSystems are available in a variety of thicknesses in smooth and granule surfaces. Reinforced with a tough, non-woven polyester mat, APP membranes deliver superior rooftop performance for both new and reroof applications. APP membranes may be installed by heat welding or with cold-applied adhesives. Warranty starting at 10 to 15 years.
ISO 95+
ISO 95+ polyiso insulation offers high-energy efficiency through the highest R-value ratings per inch versus other
insulation materials. Compatible with all types ofcommercial roofing systems, the lightweight, easy-to-handle insulation is especially suited for direct application on FM approved and UL classified steel roof deck assemblies. Standard flat Firestone ISO 95+ Insulation is available in board sizes of 4′ x 4′ and 4′ x 8′ and in thicknesses from 1″ to 4″.
Available in tapered roof systems.
FiberTop recovery Board
FiberTop cover board is suitable for use on almost any type of reroofing project and is a durable wood fiber insulation that serves as a recover board and provides insulating value in roof assemblies. Firestone FiberTop boards may be used under ballasted, fully-adhered or mechanically attached single-ply roofing systems. They are also a suitable substrate for base sheets and modified bitumen roofing systems. FiberTop boards are available in 1/2″ and 1″ thicknesses acrylic / silicone Premium Coatings.
(To Restore And Extend The Life Of
Existing Roofing Systems)
A Silicone Restoration Membrane is a versatile and self-flashing silicone membrane material perfect for commercial roof renewal. After the existing roof is clean and repaired, the silicone coating is sprayed on, sealing any imperfections and adding a waterproof layer on your commercial roof.
Whether your roof is flat or pitched, an SRM can handle any type roof, including those with skylights, vents, HVAC units, and drainage systems. Our experienced project managers and applicators bring decades of roofing experience to each job. Flat Roof Company knows when to repair or replace a roof, giving you options that ensure the best solution at the best price.
coatings can be applied to virtually any roofing system to help extend its life and delay
replacement
• Works on SBS, APP, BUR, PVC, TPO, EPDM, CSPE, as well as metal roofs
• Proven in the field for over 30 years
• Up to 50% less than other replacement roofing systems guarantees up to 15+years of durability.
Cold/ Hot tar Roof system/ Repair
Cold/hot tar roof system/repair offers Ply IV (4) M and Ply VI (6) M asphalt impregnated, glass fiber mat reinforced roofing felts that can installed in multiple layers with a flood coat and aggregate or used in combination with modified bitumen.
The Ply IV (4) M and Ply VI (6) M felts provide superior durability and ease of application to construct Firestone Built-Up Roofing (BUR) Systems
Aluminum Roof Coating
aluminum roof coating is an ultra-premium fibered aluminum roof coating that forms a shiny, tough, reflective surface. It can decrease heating and air conditioning costs and keeps the inside temperature of a building up to 20°F cooler in summer. This coating is designed for use on the roofs of barns, homes, garages and mobile homes.
⦁ Seals hairline cracks and pinholes to help increase water resistance of the roof and prevents leaks
⦁ 7-year warranty
⦁ For metal, smooth or mineral surface roll roofing, SBS and APP modified roofing, and evaporative coolers
⦁ Over brushing will interfere with leafing action of the aluminum, so apply to a dry surface, application to a damp surface will cause this product to appear brown
⦁ Mechanically mix thoroughly before and during application, apply with a good quality soft-bristled brush or commercial-grade spray equipment, apply liberally brushing in 1 direction only and do not lap
Flash Master roof cement
Flash Master roof cement is a long-lasting, high-quality, asphalt-based formulation. It is designed to be applied to dry surfaces when it is not raining. It is flexible and will not sag, making it ideal for sealing vertical as well as flat surfaces.
⦁ Rubber-modified asphalt-based no-sag formula won’t drip in vertical applications
⦁ Formulated for application under dry conditions only, waterproof when cured
⦁ Apply with roofing trowel, putty knife or caulk gun
⦁ 1 Gal. covers up to 12-1/2 sq. ft. to a 1/8 in. thickness
⦁ Seals leaks around chimneys, skylights and other roof openings as well as repairs shingles, roofing, flashing, splits, cracks and raised edges
Install HD
Install HD and transformed it by strengthening the common bond and creating the industry’s largest nailing zone. HDZ Shingles have the same renowned quality and performance you know and love, with improved nailing accuracy and installation efficiency. HDZ Shingles are easy and fast to install, with an incredible 99.9% nail placement accuracy.
A great value and architecturally stylish – with a Lifetime limited warranty (See GAF Shingle & Accessory Limited Warranty for complete coverage and restrictions)
⦁ New StrikeZone Nailing Area is the industry’s largest nail zone designed for high visibility, ease of installation, and maximum accuracy
⦁ Proprietary LayerLock Technology mechanically fastens the common bond, allowing for a larger nailing area – up to 600% larger nailing target** (**Compared to HD Shingles)
⦁ A dimensional look that features GAF’s proprietary color blends and enhanced shadow effect for a genuine wood-shake look
⦁ Highest Roofing Fire Rating – UL Class A, Listed to ANSI/UL 802
⦁ Dura Grip sealant pairs with the smooth microgranule surface of the StrikeZone nailing area for fast tack. Then, an asphalt-to asphalt monolithic bond cures for durability, strength, and exceptional wind uplift performance
⦁ Lifetime limited transferable warranty with Smart Choice Protection (non-prorated material and installation labor coverage) for the first ten years
Eligible for the WindProven Limited Wind Warranty when installed with the required
⦁ combination of GAF Accessories. (See GAF Roofing System Limited Warranty for complete coverage and restrictions and list of qualifying products.)
⦁ WindProven™ Limited Wind Warranty on Shingles with LayerLock™ Technology requires the use of GAF Starter Strips, Roof Deck Protection, Ridge Cap Shingles, and Leak Barrier or Attic Ventilation.
⦁ Note: it is difficult to reproduce the color clarity and actual color blends of these products before selecting your color,
Let Us Be Your First Choice With Prompt & Reliable Service
*Excellent Local References * Licensed & Insured
*Fast Same Day Response!!! *Firestone Certified Technicians.
*Insurance Claims * Payment Terms Available * All Work Is Guaranteed
Senior military discounts
10% new contracts
100$ gift cards for referrals.
Contact Us
About Flat Roof Company
Company Description
At our family-owned and operated company, we take pride in delivering exceptional roofing and general contracting services. Every project is handled by our dedicated employees, ensuring that you receive the highest quality of work from a team that truly cares. We are certified by numerous manufacturers, allowing us to provide a wide range of roofing solutions tailored to meet your specific needs.
Our commitment to excellence is reflected in our robust guarantee and warranty programs, giving you peace of mind that your investment is protected. We strive to exceed customer expectations with every job, treating your home as if it were our own.
Contact Information
Location:
6309 Fort Smallwood Rd., Building Two
Baltimore, MD 21226
Phone:
410-615-7663
Email:
frcllcus@gmail.com
Our commitment to you
Our team’s primary goal is to ensure you have the best experience possible while receiving top-notch workmanship. We believe that quality should never be compromised, and we strive to exceed your expectations in every project we undertake. From the initial consultation to project completion, our dedicated team works diligently to provide the highest level of service and craftsmanship. Your satisfaction is our priority, and we are here to make your vision a reality!